Front Vehicle Speed Sensor: Installation

Install the front vehicle speed sensor.
Tightening torque:

7 N.m (0.7 kgf-m, 5.2 ft-lb)

Fig 1: Identifying Front Vehicle Speed Sensor Securing Bolt
Connect the front vehicle speed sensor connector.
Apply proper amount of liquid gasket to the entire oil pan mating surface.
Liquid gasket:

THREE BOND 1217B (Part No. K0877YA020)

Fig 2: Identifying Oil Pan Mating Surface
Install the oil pan by equally tightening the bolts.
Tightening torque:

5 N.m (0.5 kgf-m, 3.7 ft-lb)
Install the center differential carrier. < Ref. to INSTALLATION , Center Differential Carrier. >
Install the extension case.
Tightening torque:

25 N.m (2.5 kgf-m, 18 ft-lb)

Fig 3: Identifying Extension Case
Install the rear vehicle speed sensor.
Tightening torque:

7 N.m (0.7 kgf-m, 5.2 ft-lb)

Fig 4: Identifying Rear Vehicle Speed Sensor
Install the transmission assembly to the vehicle. < Ref. to INSTALLATION , Automatic Transmission Assembly. >
Pour ATF from the oil charge pipe. < Ref. to REPLACEMENT , Automatic Transmission Fluid. >
Check the level and leaks of ATF. < Ref. to INSPECTION , Automatic Transmission Fluid. >