LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2006 >> Outback R >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission 5AT >> General Description >> Preparation Tool >> Special Tool
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Special Tool

SPECIAL TOOL - SPECIFICATION

ILLUSTRATION TOOL NUMBER DESCRIPTION REMARKS
G05002425
498575400 OIL PRESSURE GAUGE ASSY Used for measuring oil pressure.
G05002426
498897200 ADAPTER Used with oil pump cover installed on when measuring line pressure.
G05002427
498897700 OIL PRESSURE ADAPTER Used for measuring transfer clutch pressure.
G05002428
498545400 FILTER WRENCH Used for removing and installing the ATF filter.
G04997553
498277200 STOPPER SET Used for removing and installing automatic transmission assembly to engine.
G04994502
41099AA010 ENGINE SUPPORT BRACKET Used for supporting engine.
G04994503
41099AA020 ENGINE SUPPORT Used for supporting engine.
G05002431
398527700 PULLER ASSY
  • Used for removing the extension case roller bearing.
  • Used for removing the extension oil seal.
  • Used for removing the front differential side retainer bearing outer race.
  • Used for removing the front differential side retainer oil seal.
G05002432
498057300 INSTALLER Used for installing the extension oil seal.
G05002433
498077000 REMOVER Used for removing the differential taper roller bearing.
G05002925
18630AA010 WRENCH COMPL RETAINER Used for removing and installing the differential side retainer.
G04990233
398487700 DRIFT Used for installing the front differential taper roller bearing.
G05002439
498255400 PLATE Used for measuring the backlash of hypoid gear.
G05002441
498247001 MAGNET BASE
  • Used for measuring the gear backlash.
  • Used with DIAL GAUGE (498247100).
G05002442
498247100 DIAL GAUGE
  • Used for measuring the gear backlash.
  • Used with MAGNET BASE (498247001).
G05002443
498517000 REPLACER Used for removing the front roller bearing.
G05002446
499787700 WRENCH Used for removing and installing the drive pinion lock nut.
G05002448
398643600 GAUGE Used for measuring the total end play, extension end play and drive pinion height.
G05022157
378744300 PISTON GUIDE Used for measuring height from mating surface of the main case to pressure plate.
G05002453
499737100 PULLER SET Used for removing the reduction driven gear assembly.
G05002916
498077600 REMOVER Used for removing the ball bearing.
G05022160
18667AA010 HOLDER
  • Used for removing and installing the drive pinion lock nut.
  • Used as a handle to rotate gear when checking tooth contact.
G04997550
18482AA010 CARTRIDGE Troubleshooting for electrical system.
G04997551
22771AA030 SUBARU SELECT MONITOR KIT Troubleshooting for electrical system.
G05002460
18675AA000 DIFFERENTIAL SIDE OIL SEAL INSTALLER Used for installing the differential side retainer oil seal.
G05003214
18654AA000 INSTALLER Used for removing and installing the ball bearing.
G05002461
28399SA010 OIL SEAL PROTECTOR Used for protecting oil seal when installing front drive shaft.
G05022166
18763AA000 COMPRESSOR SHAFT Used for disassembling multi-plate clutch for shift transmission.
G05022167
18765AA000 COMPRESSOR SUPPORT Used for disassembling multi-plate clutch for shift transmission.
G05022168
18676AA020 TORX® WRENCH Used for disassembling torque converter case.
G05022169
18854AA000 ANGLE GAUGE Used for tightening parking support.
G05002916
498077300 REMOVER Used for removing ball bearing of reduction driven gear.
G04997567
499587100 OIL SEAL INSTALLER Used for installing the oil seal.
G05002447
499787500 ADAPTER Used for removing and installing drive pinion lock nut.
G05022173
499575400 GAUGE Used for measuring height of total end play.
G05022174
18762AA000 COMPRESSOR SPECIAL TOOL Used for disassembling multi-plate clutch for shift transmission.
G05022175
499755602 PRESS Used for installing the parking gear.
G05022176
18680AA010 HOLDER GEAR Used for removing reduction driven gear assembly. (2-piece set)
G05022177
18766AA000 SUPPORT PULLER Used for removing reduction driven gear assembly.
G05022178
18767AA000 REMOVER
  • Used to pull out the parking gear.
  • Used to pull out the bearing from the VTD assembly.