LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2006 >> Outback XT, Automatic >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection (Fuel Systems) (H4DOTC) >> Camshaft Position Sensor >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Camshaft Position Sensor: Removal

  1. Remove the collector cover.
  2. Disconnect the ground cable from battery.
    Fig 1: Removing Collector Cover
    G05019586
  3. Disconnect the connector from camshaft position sensor RH.
  4. Remove the camshaft position sensor RH from the rear side of the cylinder head.
    Fig 2: Locating Camshaft Position Sensor RH From Rear Side Of Cylinder Head
    G05017802
  5. Remove the cam shaft position sensor LH in the same way as RH.
scientia non olet · About LEMON Manuals