LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2006 >> Outback XT, Automatic >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection (Fuel Systems) (H4DOTC) >> Crankshaft Position Sensor >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Crankshaft Position Sensor: Removal

  1. Remove the collector cover.
  2. Disconnect the ground cable from battery.
    Fig 1: Removing Collector Cover
    G05019586
  3. Remove the generator. < Ref. to REMOVAL , Generator. >
  4. Remove the bolt which installs crankshaft position sensor to cylinder block.
    Fig 2: Identifying Crankshaft Position Sensor
    G04997337
  5. Remove the crankshaft position sensor, and then disconnect the connector from it.
    Fig 3: Disconnecting Connector
    G04997386
scientia non olet · About LEMON Manuals