Exhaust Temperature Sensor: Installation

Before installing exhaust temperature sensor, apply anti-seize compound only to the threaded portion of exhaust temperature sensor. This facilitates the next removal.
CAUTION: Never apply anti-seize compound to protector of the exhaust temperature sensor.

Anti-seize compound:

NEVER-SEEZ NS-165 or the equivalent
Install the exhaust temperature sensor.
NOTE: Align the harness (A) of exhaust temperature sensor to the marking (B) of joint pipe, and tighten the screws.

Tightening torque:

21 N.m (2.1 kgf-m, 15.2 ft-lb)

Fig 1: Aligning Harness Of Exhaust Temperature Sensor To Marking Of Joint Pipe
Install the joint pipe.
< Ref. to INSTALLATION , Joint Pipe. >
Connect the battery ground cable to the battery.

Fig 2: Removing Collector Cover