LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2006 >> Outback XT, Automatic >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection (Fuel Systems) (H4DOTC) >> Knock Sensor >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Knock Sensor: Installation

  1. Install the knock sensor to the cylinder block.
    NOTE: The portion of the knock sensor cord that is pulled out must be positioned at a 60° angle relative to the engine rear.

    Tightening torque: 

    24 N.m (2.4 kgf-m, 17.4 ft-lb) 

    Fig 1: Identifying Knock Sensor Cord Position Angle
    G05017806
  2. Connect the knock sensor connector.
    Fig 2: Identifying Knock Sensor Connector
    G05017743
  3. Install the intercooler.

    < Ref. to INSTALLATION , Intercooler. >

  4. Connect the battery ground cable to the battery.
    Fig 3: Removing Collector Cover
    G05019586
  5. Install the collector cover.
scientia non olet · About LEMON Manuals