Remote Control Mirror Switch

Move the remote control mirror switch to each position and check continuity between terminals.

Fig 1: Identifying Remote Control Mirror Switch Connector Terminals

• Change over switch R
  RESISTANCE SPECIFICATION CHART
  
  

  Switch position	Terminal No.	Standard
  OFF	-	1 M Ω or more
  UP	10 and 12, 15 and 14	Less than 1 Ω
  DOWN	10 and 15, 12 and 14	Less than 1 Ω
  LEFT	10 and 11, 15 and 14	Less than 1 Ω
  RIGHT	10 and 15, 11 and 14	Less than 1 Ω

• Change over switch L
  RESISTANCE SPECIFICATION CHART
  
  

  Switch position	Terminal No.	Standard
  OFF	-	1 MΩ or more
  UP	10 and 8, 15 and 14	Less than 1 Ω
  DOWN	10 and 15, 8 and 14	Less than 1 Ω
  LEFT	10 and 9, 15 and 14	Less than 1 Ω
  RIGHT	10 and 15, 9 and 14	Less than 1 Ω

  Replace the remote control mirror switch if defective.