LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2006 >> Outback i, Automatic >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection (Fuel Systems) (H4SO) >> 26.Fuel Sub Level Sensor >> A: Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

A: Removal

WARNING:
  • Place "NO FIRE" signs near the working area.
  • Be careful not to spill fuel.
  1. Drain fuel. < Ref. to DRAINING FUEL , PROCEDURE, Fuel. >
  2. Remove the rear seat.
  3. Remove the service hole cover.
    1. Remove bolt (A).
    2. Push the grommet (B) down and remove the service hole cover.
      Fig 1: Identifying Service Hole Cover
      G05016866
  4. Disconnect the connector from the fuel sub level sensor.
    Fig 2: Identifying Connector From Fuel Sub Level Sensor
    G05016927
  5. Disconnect the quick connector, then disconnect the fuel delivery hose and jet pump hose. < Ref. to REMOVAL , Fuel Delivery and Evaporation Lines. >
  6. Remove the nuts and bolts which install fuel sub level sensor on fuel tank.
    Fig 3: Identifying Fuel Sub Level Sensor On Fuel Tank
    G05016928
  7. Remove the fuel sub level sensor.
scientia non olet · About LEMON Manuals