LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2006 >> Outback i, Automatic >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection (Fuel Systems) (H4SO) >> 3. Intake Manifold >> C: Disassembly
April 5, 2026: LEMON Manuals is launched! Read the announcement.

C: Disassembly

  1. Disconnect the engine ground terminal from intake manifold.
    Fig 1: Locating Engine Ground Terminal From Intake Manifold
    G05016766
  2. Remove the ignition coil and ignitor assembly. < Ref. to REMOVAL , Ignition Coil and Ignitor Assembly. >
  3. Remove the throttle body. < Ref. to REMOVAL , Throttle Body. >
  4. Remove the EGR valve. < Ref. to REMOVAL , EGR Valve. >
  5. Remove the PCV pipe.
    Fig 2: Locating PCV Pipe
    G04997359
  6. Remove the fuel pipe protector LH.
    Fig 3: Locating Fuel Pipe Protector LH
    G04997360
  7. Remove the fuel pipe protector RH.
    Fig 4: Locating Fuel Pipe Protector RH
    G04997361
  8. Disconnect the connectors (A) from fuel injector.
  9. Remove the harness band (B) which holds the engine harness to injector pipe.
    Fig 5: Identifying Harness Band And Fuel Injector Connector
    G04997362
  10. Remove the purge control solenoid valve. < Ref. to REMOVAL , Purge Control Solenoid Valve. >
  11. Remove the harness band clips which install the engine harness.
    Fig 6: Locating Engine Harness
    G04997363
  12. Remove the bolts which hold engine harness to intake manifold.
    Fig 7: Locating Engine Harness Bolts
    G04997364
  13. Remove the engine harness from intake manifold.
  14. Remove the bolts which install injector pipe on the intake manifold as shown in the figure
    • RH side
      Fig 8: Locating Fuel Injector Pipe Bolts - RH Side
      G04997365
    • LH side
      Fig 9: Locating Fuel Injector Pipe Bolts - LH Side
      G04997366
      Fig 10: Locating Fuel Injector Pipe Bolts
      G04997367
  15. Remove the fuel injectors from injector pipe.
  16. Disconnect the quick connector that fastens the fuel injector pipe RH to the fuel pipe.
    Fig 11: Identifying Fuel Injector Pipe
    G04997368
  17. Disconnect the quick connector that fastens the fuel injector pipe LH to the fuel pipe.
    Fig 12: Identifying Fuel Injector Pipe
    G04997369
  18. Remove the fuel injector pipe RH and LH.
  19. Remove the bolts which install fuel pipes on intake manifold.
    Fig 13: Identifying Fuel Injector Pipes
    G04997370
  20. Remove the fuel pipe from intake manifold.
scientia non olet · About LEMON Manuals