LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2007 >> B9 Tribeca Base >> Repair and Diagnosis >> Body & Frame >> Windows >> Glass/Windows/Mirrors >> Windshield Glass >> Removal >> Using Piano Wire
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Using Piano Wire

  1. Remove the cowl panel. < Ref. to REMOVAL , Cowl Panel. >
  2. Remove the molding front.
  3. Tape the body side of the circumference of windshield glass for protection.
  4. Make a hole in the adhesive part using drill or knife.
  5. Pass the piano wire through the hole, and attach both the wire ends securely to pieces of wood.
    Fig 1: Removing Roof Molding And Upper Front Molding
    G05004259Courtesy of SUBARU OF AMERICA, INC.
  6. Pull the wire ends alternately to cut off the adhesive part.
CAUTION:
  • Do not tightly pull the piano wire against the windshield glass edge.
  • Be careful not to damage interior and exterior parts.
  • When removal is made with area close to instrument panel, place a protection plate over it. Pay particular attention to the removal.
  • Do not cross piano wires. Otherwise they may be cut.
scientia non olet · About LEMON Manuals