LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2007 >> B9 Tribeca Base >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection System (H6DO) >> Camshaft Position Sensor >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Camshaft Position Sensor: Removal

  1. Remove the collector cover.
  2. Disconnect the ground cable from the battery.
  3. Remove the generator harness from the fuel pipe protector LH.
  4. Remove the fuel pipe protector LH.
    Fig 1: Identifying Fuel Pipe Protector LH Bolts
    G05018408Courtesy of SUBARU OF AMERICA, INC.
  5. Disconnect the connector from camshaft position sensor LH.
    Fig 2: Identifying Camshaft Position Sensor LH Connector
    G05018443Courtesy of SUBARU OF AMERICA, INC.
  6. Remove the camshaft position sensor LH.
    Fig 3: Identifying Camshaft Position Sensor LH
    G05018444Courtesy of SUBARU OF AMERICA, INC.
  7. Remove the camshaft position sensor RH in the same procedure as LH.
scientia non olet · About LEMON Manuals