LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2007 >> B9 Tribeca Base >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection System (H6DO) >> Crankshaft Position Sensor >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Crankshaft Position Sensor: Removal

  1. Remove the collector cover.
  2. Disconnect the ground cable from the battery.
  3. Remove the air intake chamber. <Ref. to REMOVAL , Air Intake Chambers .>
  4. Remove the service hole cover.
    Fig 1: Identifying Service Hole Cover
    G05018438Courtesy of SUBARU OF AMERICA, INC.
  5. Remove the crankshaft position sensor.
    Fig 2: Identifying Crankshaft Position Sensor
    G05018439Courtesy of SUBARU OF AMERICA, INC.
  6. Disconnect the connector from crankshaft position sensor.
scientia non olet · About LEMON Manuals