LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2007 >> B9 Tribeca Base >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection System (H6DO) >> Fuel Sub Level Sensor >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fuel Sub Level Sensor: Removal

WARNING: Place "NO FIRE" signs near the working area.
CAUTION: Be careful not to spill fuel.
  1. Drain fuel. <Ref. to DRAINING FUEL , Procedure, Fuel .>
  2. Remove the second seat. <Ref. to REMOVAL , Second-Row Seats .>
  3. Remove the service hole cover.
    Fig 1: Identifying Service Hole Cover Screw
    G05031085Courtesy of SUBARU OF AMERICA, INC.
  4. Disconnect the connector from the fuel sub level sensor.
    Fig 2: Identifying Fuel Sub Level Sensor Connector
    G05016927Courtesy of SUBARU OF AMERICA, INC.
  5. Disconnect the quick connector, and then disconnect the fuel delivery hose and jet pump hose. <Ref. to REMOVAL , Fuel Delivery &amp; Evaporation Lines .>
  6. Remove the nuts and bolts which install fuel sub level sensor on fuel tank.
    Fig 3: Identifying Delivery Hose And Jet Pump Hose
    G05345638Courtesy of SUBARU OF AMERICA, INC.
  7. Remove the fuel sub level sensor.
scientia non olet · About LEMON Manuals