Intake Manifold: Disassembly

Remove the engine harness from intake manifold.
Remove the throttle body. <Ref. to REMOVAL , Throttle Body .>
Remove the manifold absolute pressure sensor. <Ref. to REMOVAL , Manifold Absolute Pressure Sensors .>
Remove the purge control solenoid valve. <Ref. to REMOVAL , Purge Control Solenoid Valves .>
Loosen the clamp which holds fuel injector pipe to the fuel hose, and then disconnect the pipe from fuel hose.

Fig 1: Identifying Fuel Hose
Courtesy of SUBARU OF AMERICA, INC.
Remove the bolts which install fuel pipes on intake manifold.

Fig 2: Identifying Fuel Pipes Bolts
Courtesy of SUBARU OF AMERICA, INC.

Fig 3: Identifying Intake Manifold Bolts
Courtesy of SUBARU OF AMERICA, INC.