LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2007 >> Forester X, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> A/T Control Systems >> Select Cable >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Select Cable: Removal

  1. Set the vehicle on a lift.
  2. Disconnect the ground cable from battery.
  3. Prior to removal, set the lever to "N" range.
  4. Lift-up the vehicle.
  5. Remove the front and center exhaust pipes. Non-turbo model

    <Ref. to REMOVAL Front Exhaust Pipe. >

    Turbo model

    <Ref. to REMOVAL Front Exhaust Pipe. >

  6. Remove the heat shield cover. (If equipped)
  7. Remove the snap ring from the range select lever.
    Fig 1: Identifying Snap Ring And Range Select Lever
    G04993928Courtesy of SUBARU OF AMERICA, INC.
  8. Remove the plate assembly from the transmission case.
    Fig 2: Identifying Plate Assembly
    G04993929Courtesy of SUBARU OF AMERICA, INC.
  9. Disconnect the select cable from select lever and then remove the cable bracket.
    Fig 3: Identifying Select Cable From Select Lever
    G04993930Courtesy of SUBARU OF AMERICA, INC.
  10. Remove the select cable from plate assembly.
scientia non olet · About LEMON Manuals