LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2007 >> Outback XT Limited, Automatic >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection System (H4DOTC) >> Camshaft Position Sensor >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Camshaft Position Sensor: Removal

  1. Remove the collector cover.
  2. Disconnect the ground cable from battery.
    Fig 1: Disconnecting Ground Cable From Battery
    G05019586Courtesy of SUBARU OF AMERICA, INC.
  3. Disconnect the connector from camshaft position sensor RH.
  4. Remove the camshaft position sensor RH from the rear side of the cylinder head.
    Fig 2: Locating Camshaft Position Sensor RH Bolt
    G05017802Courtesy of SUBARU OF AMERICA, INC.
  5. Remove the cam shaft position sensor LH in the same way as RH.
scientia non olet · About LEMON Manuals