Fuel Sub Level Sensor: Removal

WARNING: Place "NO OPEN FLAMES" signs near the working area.

CAUTION:

Be careful not to spill fuel.
Before starting work, be sure to reduce fuel in the fuel tank to 3/4 of the tank or less. If there is more fuel in the tank, fuel may spill out.

Drain fuel. <Ref. to , DRAINING FUEL, PROCEDURE, FUEL . >
Remove the rear seat.
Remove the service hole cover.
1. Remove bolt (A).
2. Push the grommet (B) down and remove the service hole cover.
  
  Fig 1: Identifying Service Hole Cover Bolts
  Courtesy of SUBARU OF AMERICA, INC.
Disconnect the connector from the fuel sub level sensor.

Fig 2: Locating Fuel Sub Level Sensor Connector
Courtesy of SUBARU OF AMERICA, INC.
Disconnect the quick connector, then disconnect the fuel delivery hose, return hose and jet pump hose. <Ref. to REMOVAL , Fuel Delivery, Return and Evaporation Lines .>
Remove the nuts and bolts which install fuel sub level sensor on fuel tank.

Fig 3: Identifying Delivery Hose, Return Hose And Jet Pump Hose
Courtesy of SUBARU OF AMERICA, INC.
Remove the fuel sub level sensor.