SI-DRIVE Selector: Removal

Disconnect the ground cable from battery.

Fig 1: Disconnecting Ground Cable From Battery
Courtesy of SUBARU OF AMERICA, INC.
Remove the console box. <Ref. to REMOVAL , Glove Box .>
Disconnect the connectors from the SI-DRIVE selector.

Fig 2: Locating SI-DRIVE Selector Connectors
Courtesy of SUBARU OF AMERICA, INC.
Remove the screws securing the upper side of the SI-DRIVE selector to the console box.

Fig 3: Locating SI-DRIVE Selector Screws
Courtesy of SUBARU OF AMERICA, INC.
Remove the screws which secure the cup holder to the console box, then remove the SI-DRIVE selector.