Crankshaft Position Sensor: Removal

Remove the collector cover.
Disconnect the ground cable from battery.

Fig 1: Disconnecting Ground Cable From Battery
Courtesy of SUBARU OF AMERICA, INC.
Remove the generator. <Ref. to REMOVAL , Generator .>
Remove the bolt which installs crankshaft position sensor to cylinder block.

Fig 2: Identifying Crankshaft Position Sensor Bolt
Courtesy of SUBARU OF AMERICA, INC.
Remove the crankshaft position sensor, and then disconnect the connector from it.

Fig 3: Identifying Crankshaft Position Sensor
Courtesy of SUBARU OF AMERICA, INC.