Idle Speed Control
CAUTION:
After performing the Operation Check Mode, perform the Clear Memory Mode <Ref. to
OPERATION , Clear Memory Mode .>.
- On the «System Operation Check Mode» display screen, select {Idle Speed Control}.
- On the «Start the Engine» display screen, start the engine and select the [OK].
- In the «ldle Speed Control» screen, select the [↑] or the [↓] to change the setting values, then select the [OK].
Setting is possible in a range between 500 rpm - 2,000 rpm, in increments of 50 rpm. However, the engine speed that can actually be controlled will vary depending on the vehicle.
- Select the [NO] to end the idle engine speed control. The screen will return to the «System Operation Check Mode» screen.