Clutch Switch: Inspection

Make sure that engine does not start with clutch pedal not depressed. If the engine starts, adjust the clutch switch and inspect the starter interlock circuit.
Make sure that engine starts with clutch pedal fully depressed. If the engine does not start, adjust the clutch switch and inspect the starter interlock circuit.

Check the clutch switch for continuity. If the resistance is not at the standard value, replace the switch.

RESISTANCE SPECIFICATION

Condition	Terminal No.	Specified resistance
When clutch pedal is depressed	1 and 2	Less than 1 Ω
When the clutch pedal is depressed.	1 and 2	1 MΩ or more

Clutch switch (Clutch start)

Fig 1: Checking Clutch Switch Resistance (Clutch Start)

Courtesy of SUBARU OF AMERICA, INC.

Clutch switch (Cruise control)

Fig 2: Checking Clutch Switch (Cruise Control) Continuity

Courtesy of SUBARU OF AMERICA, INC.