5MT Turbo Model

Install the flywheel and ST.
ST 498497100 CRANKSHAFT STOPPER

Fig 1: Installing Flywheel And ST
Courtesy of SUBARU OF AMERICA, INC.
Tighten the flywheel mounting bolts to the specified torque.
ST 499057000 TORX® PLUS

CAUTION: The bolts without identification groove as shown in the figure must be used as flywheel attaching bolts for 5MT turbo model.

Fig 2: Identifying Bolt With/Without Identification Groove
Courtesy of SUBARU OF AMERICA, INC.

NOTE: Tighten the flywheel attachment bolts gradually. Each bolt should be tightened to the specified torque in crisscross order.

Tightening torque:

72 N.m (7.3 kgf-m, 52.8 ft-lb)

Fig 3: Identifying Tightening Sequence Of Flywheel Bolts
Courtesy of SUBARU OF AMERICA, INC.
Install the clutch disc and cover. <Ref. to INSTALLATION , Clutch Disc and Cover .>
Install the transmission assembly. <Ref. to INSTALLATION , Manual Transmission Assembly .>