Select Lever: Assembly
- Clean all the parts before assembly.
- Apply grease [Multemp AC-D or equivalent] to each part. <Ref. to
AT SELECT LEVER , COMPONENT, General Description .>
- Assemble in the reverse order of disassembly.
NOTE:
- Refer to "COMPONENT" for each tightening torque. <Ref. to
AT SELECT LEVER , COMPONENT, General Description .>
- Connect the switch terminal to the connector.
Courtesy of SUBARU OF AMERICA, INC.
- After completing installation, shift the select lever from "P" range to "D" range, then check whether the indicator and select lever matches, whether the pointer and position mark matches and what the operating force is.