LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2008 >> Forester XT, Automatic >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection System (H4DOTC) >> Camshaft Position Sensor >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Camshaft Position Sensor: Removal

  1. Disconnect the ground cable from the battery.
    Fig 1: Disconnecting Ground Cable From Battery
    G04988132Courtesy of SUBARU OF AMERICA, INC.
  2. Remove the collector cover.
  3. Disconnect the connector from camshaft position sensor RH.
  4. Remove the camshaft position sensor RH from the cylinder head rear.
    Fig 2: Identifying Camshaft Position Sensor Bolt
    G04998270Courtesy of SUBARU OF AMERICA, INC.
  5. Remove the cam shaft position sensor LH in the same way as RH.
scientia non olet · About LEMON Manuals