RH Side
- Release the fuel pressure. <Ref. to RELEASING OF FUEL PRESSURE , PROCEDURE, Fuel. >
- Disconnect the ground cable from the battery.
- Open the fuel filler flap lid, and remove the fuel filler cap.
- Remove the collector cover.
- Remove the air cleaner upper cover and air intake boot. <Ref. to REMOVAL , Air Cleaner Case. >
- Remove the air cleaner element.
- Remove the coolant filler tank.
<Ref. REMOVAL , Coolant Filler Tank. >
- Remove the power steering pump.
- Remove the front side of the V-belts. <Ref. to A: REMOVAL , V-belt. >
- Disconnect the power steering switch connector.
- Remove the bolts which install the power steering pipe bracket to the intake manifold.NOTE: Do not disconnect the power steering hose.
- Remove the bolts which install power steering pump bracket.
- Remove the reservoir tank from the bracket by pulling it upward.
- Place the power steering pump on the right side wheel apron.
- Remove the fuel pipe protector RH.
- Disconnect the connector from fuel injector.
- Remove the bolt which holds the injector pipe to the intake manifold.
- Remove the fuel injector while lifting up the fuel injector pipe.