Wastegate Control Solenoid Valve: Removal

Disconnect the ground cable from the battery.

Fig 1: Disconnecting Ground Cable From Battery
Courtesy of SUBARU OF AMERICA, INC.
Remove the engine harness connector (A) from bracket.
Disconnect the connector (B) from wastegate control solenoid valve.
Remove the front oxygen (A/F) sensor connector (C) from the bracket.

Fig 2: Identifying Wastegate Control Solenoid Valve, Engine Harness And Front Oxygen (A/F) Sensor Connector
Courtesy of SUBARU OF AMERICA, INC.
Remove the bracket from vehicle body.

Fig 3: Identifying Bracket Bolts
Courtesy of SUBARU OF AMERICA, INC.
Disconnect pressure hose (D) from the waste-gate control solenoid valve.

Fig 4: Identifying Pressure Hose
Courtesy of SUBARU OF AMERICA, INC.
Remove the wastegate control solenoid valve from the bracket.