Fuel Level Sensor: Removal
WARNING:
Place "NO OPEN FLAMES" signs near the working area.
CAUTION:
- Be careful not to spill fuel.
- Prior to start work, be sure to set the fuel volume to three-forth full of the fuel tank. If the fuel is more than three-forth full of the fuel tank, be careful because the fuel may spill out.
NOTE:
The fuel level sensor is built in fuel pump assembly.
- Remove the fuel pump assembly. < Ref. to REMOVAL , Fuel Pump. >
- Disconnect the connector from fuel pump bracket.
- Remove the fuel temperature sensor.
- Remove the fuel level sensor.