Intake Manifold: Disassembly

Remove the engine harness from intake manifold.
Remove the throttle body. < Ref. to REMOVAL , Throttle Body. >
Remove the EGR valve. < Ref. to REMOVAL , EGR Valve. >
Remove the manifold absolute pressure sensor. < Ref. to REMOVAL , Manifold Absolute Pressure Sensor. >
Remove the purge control solenoid valve. < Ref. to REMOVAL , Purge Control Solenoid Valve. >
Loosen the clamp which holds fuel injector pipe to the fuel hose, and then disconnect the pipe from fuel hose.

Fig 1: Locating Fuel Hose Clamp
Courtesy of SUBARU OF AMERICA, INC.
Remove the bolts which install fuel pipes on intake manifold.

Fig 2: Locating Fuel Pipes Bolts
Courtesy of SUBARU OF AMERICA, INC.

Fig 3: Locating Intake Manifold Bolts
Courtesy of SUBARU OF AMERICA, INC.