Check With SUBARU Select Monitor

CAUTION: Check whether the wiper deicer timer is in initial setting or customize setting before performing inspection.

DIAGNOSTIC PROCEDURE CHART

Step	Check	Yes	No
1 CHECK INPUT SIGNAL TO BODY INTEGRATED UNIT. Check the input signal when the wiper deicer switch is operated using Subaru Select Monitor. Connect the Subaru Select Monitor to the data link connector. Turn the ignition switch to ON. Select {Integ. unit} from the «main menu». Select the {Current Data Display & Save}. Check the input signal when the wiper deicer switch is set to ON.	After the wiper deicer switch is set to ON, does it turn to OFF in 15 minutes? Or does it operate continuously?	END.	Replace the body integrated unit. < Ref. to REMOVAL , Body Integrated Unit. >