LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2008 >> Outback Base, Automatic >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection System (H4SO) >> Fuel >> Procedure >> Draining Fuel
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Draining Fuel

WARNING: Place "NO OPEN FLAMES" signs near the working area.
CAUTION: Be careful not to spill fuel.
  1. Set the vehicle on a lift.
  2. Disconnect the ground cable from the battery.
    Fig 1: Identifying Ground Cable From Battery
    G05019586Courtesy of SUBARU OF AMERICA, INC.
  3. Open the fuel filler flap lid, and remove the fuel filler cap.
  4. Lift up the vehicle.
  5. Remove the fuel tank protector.
  6. Set a container under the vehicle and remove the drain plug from fuel tank to drain fuel from fuel tank.
    Fig 2: Locating Drain Plug
    G05339245Courtesy of SUBARU OF AMERICA, INC.
  7. Tighten the fuel drain plugs.
    NOTE: Use a new gasket.

    Tightening torque: 26 N.m (2.65 kgf-m, 19.2 ft-lb) 

  8. Install the fuel tank protector.
    NOTE: Use a new nut.

    Tightening torque: Nut 9 N.m (0.9 kgf-m, 6.6 ft-lb) 

    Bolt 17.5 N.m (1.78 kgf-m, 12.9 ft-lb)