LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2008 >> Outback Base, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Engine (Diagnostics) (H4SO) >> Drive Cycle >> Procedure >> Drive Cycle F
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Drive Cycle F

  1. Check that the engine coolant temperature at engine start is less than 30°C (86°F).
  2. Start the engine, and warm it up until engine coolant temperature increases over 95°C (203°F).
  3. After the engine has reached the state of procedure 2), idle the engine for 10 minutes or more.
    NOTE: Do not disconnect the battery terminals while diagnosing. (Data will be cleared by disconnecting the battery terminals.)
    DTC DIAGNOSIS CHART

    DTC Item Condition
    P0111 Intake Air Temperature Sensor 1 Circuit Range/Performance -
scientia non olet · About LEMON Manuals