TCM Reprogramming Files (11-93-09R)

Publication date: 2009-10-28
Reference number: 11-93-09R
Supersedes refnos: 11-93-09

TCM REPROGRAMMING FILES

TECHNICAL SERVICE BULLETIN

Reference Number(s): 11-93-09R, Date of Issue: October 28, 2009

SUBARU:	2008~09MY Legacy/Outback 2.5L Turbo, 5AT
SUBARU:	2008~09MY Legacy/Outback 3.0L N/A, 5AT;
SUBARU:	2008~10MY Tribeca 3.6L N/A, 5AT

INTRODUCTION

If you encounter a vehicle with the AT Oil light flashing with one or more of the following codes stored in memory (P0751, P0756, P0761, P0766, P0771, P1840, P1841, P1842, P1843, P1844) there are now reprogramming files to remedy the condition.

NOTE: P0700 will also be stored in ECM memory. The PACK file is to improve the oil pressure switch judgment criteria. If after reprogramming the vehicle still has the symptom, refer to the applicable service manual for diagnostics.

NOTE: TCM reprogramming files were sent to all SDS users in the October 2009 SSMIII update version 1.20.37.4.

PACK FILE APLICABILITY

PACK FILE NAME	NEW TCM PART NUMBER	OLD TCM PART NUMBER	MODEL/ENGINE/TRANS
30919AA525.pak	30919AA525	31711AL295	2008~2009MY Legacy 2.5L Turbo, 5AT
30919AA555.pak	30919AA555	31711AL505	2008~2009MY Legacy 3.0L, 5AT
30919AA535.pak	30919AA535	31711AL315	2008~2009MY Outback 2.5L Turbo, 5AT
30919AA545.pak	30919AA545	31711AL325	2008~2009MY Outback 3.0L, 5AT
30919AA735.pak	30919AA735	31711AL335	2008~2009MY Tribeca 3.6L, 5AT
30919AB192.pak	30919AB192	30919AB190	2010MY Tribeca 3.6L, 5AT