Steering Wheel: Installation
WARNING:
Always refer to "Airbag System" before performing service on the airbag modules. <Ref. to
CAUTION
, General Description.>
- Align the center position of the roll connector. <Ref. to ADJUSTMENT , Roll Connector.>
- Install in the reverse order of removal.NOTE: Align the alignment marks on the steering wheel and steering shaft.
Tightening torque: 45 N.m (4.6 kgf-m, 33.2 ft-lb)
Column cover-to-steering wheel clearance: 2 - 4 mm (0.08 - 0.16 in)
CAUTION: Insert the roll connector guide pin into the guide hole on the lower end of the steering wheel surface. Avoid damaging the pin.