Rear Sub Frame: Installation

Install in the reverse order of removal.
Follow the procedure below for the rear differential installation and tightening torque.
T-type

<Ref. to INSTALLATION , Rear Differential (T-type) .>

VA-type

<Ref. to INSTALLATION , Rear Differential (VA-type) .>
Support the rear arm horizontally using a transmission jack. Tighten the nuts and bolts which hold the rear arm, front link, rear link, upper link and shock absorber.

Fig 1: Supporting Rear Arm Using Transmission Jack
Courtesy of SUBARU OF AMERICA, INC.

Tightening torque:

Refer to "COMPONENT" of "General Description" for tightening torque. <Ref. to REAR SUSPENSION , COMPONENT, General Description .>
Check the wheel alignment and adjust it if necessary.