Drive Cycle G

1. Remove the battery negative terminal, and reconnect after 10 seconds have passed.
2. Start the engine and warm-up engine until coolant temperature is 80°C (176°F).
3. Start the engine and warm-up engine until coolant temperature is 40°C (104°F).
   NOTE: Do not let engine coolant temperature drop below 5°C (41°F).
4. Start the engine and warm-up engine until coolant temperature is 80°C (176°F).
5. Start the engine and warm-up engine until coolant temperature is 40°C (104°F).
   NOTE: Do not let engine coolant temperature drop below 5°C (41 °F).
6. Start and idle the engine.

This drive cycle covers secondary air injection system.