Drive Cycle H

1. Perform the Clear Memory Mode.
2. Read the engine coolant temperature, intake air temperature and fuel temperature with ignition switch ON.
3. If the values from step  2 satisfy the following two conditions, start the engine.

   Condition: 

   Engine coolant temperature - Intake air temperature ≤ 5°C (41°F) 

   Engine coolant temperature - Fuel temperature ≤ 2°C (36°F) 

   NOTE:

   • If the value does not meet the conditions, turn the ignition switch to OFF and wait until it meets.
   • Start the engine in P range (AT model) or in N position (MT model).
4. Idle the engine for one minute in the condition of step  3.

This drive cycle covers control module programming.