Camshaft Position Sensor: Removal

Remove the collector cover.
Disconnect the ground cable from the battery.

Fig 1: Disconnecting Ground Cable From Battery
Courtesy of SUBARU OF AMERICA, INC.
Remove the generator harness from the fuel pipe protector LH.
Remove the fuel pipe protector LH.

Fig 2: Locating Fuel Pipe Protector Bolts (LH)
Courtesy of SUBARU OF AMERICA, INC.
Disconnect the connector from camshaft position sensor LH.

Fig 3: Locating Camshaft Position Sensor
Courtesy of SUBARU OF AMERICA, INC.
Remove the camshaft position sensor LH.

Fig 4: Locating Camshaft Position Sensor
Courtesy of SUBARU OF AMERICA, INC.
Remove the camshaft position sensor RH in the same procedure as LH.