Front Door Glass: Removal

Remove the front door trim. < Ref. to REMOVAL , Door Trim.>
Remove the sealing cover. < Ref. to REMOVAL , Front Sealing Cover.>
Operate the power window switch to move the glass to the position shown in the figure, and then remove the two bolts through service holes.

Fig 1: Locating Service Holes Bolts
Courtesy of SUBARU OF AMERICA, INC.
Tilt the door glass forward, then remove the door glass from the glass run rubber.
Remove the door glass.

Fig 2: Removing Door Glass
Courtesy of SUBARU OF AMERICA, INC.
CAUTION:
- Since the gear may be disengaged, do not turn regulator in the closing direction after removing glass.
- Avoid impact and damage to the glass.
Remove the bolt (A), and then remove the door sash (B).

Fig 3: Removing Door Sash And Bolt
Courtesy of SUBARU OF AMERICA, INC.