Using Piano Wire
- Remove the cowl panel. < Ref. to
REMOVAL
, Cowl Panel.>
- Remove the molding front.
- Apply protective tape to the body panel side to enclose the windshield glass.
- Make a hole in the adhesive part using drill or knife.
- Pass the piano wire through the hole, and attach both the wire ends securely to pieces of wood.
Courtesy of SUBARU OF AMERICA, INC.
- Pull the wire ends alternately to cut off the adhesive part.
CAUTION:
- Do not tightly pull the piano wire against the windshield glass edge.
- Be careful not to damage interior and exterior parts.
- When removal is made with area close to instrument panel, place a protection plate over it. Pay particular attention to the removal.
- Do not cross piano wires. Otherwise they may be cut.