LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2008 >> Tribeca Base >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection System (H6DO) >> Camshaft Position Sensor >> Removal >> Intake Side
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Intake Side

  1. Remove the collector cover.
  2. Disconnect the ground cable from battery.
  3. Remove the generator harness from the fuel protector LH.
  4. Remove the fuel protector LH.
    Fig 1: Locating Fuel Pipe Protector Bolts (LH)
    G05018408Courtesy of SUBARU OF AMERICA, INC.
  5. Disconnect the connector from intake camshaft position sensor LH.
    Fig 2: Identifying Intake Camshaft Position Sensor Connector LH
    G05667582Courtesy of SUBARU OF AMERICA, INC.
  6. Remove the intake camshaft position sensor LH.
    Fig 3: Identifying Intake Camshaft Position Sensor LH
    G05667583Courtesy of SUBARU OF AMERICA, INC.
  7. Remove the intake camshaft position sensor RH in the same procedure as LH.
scientia non olet · About LEMON Manuals