LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2008 >> Tribeca Base >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection System (H6DO) >> Engine Control Module (ECM) >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Engine Control Module (ECM): Removal

  1. Disconnect the ground cable from the battery.
  2. Remove the front pillar lower trim and console side panel lower RH of passenger's side.
  3. Detach the floor mat of passenger's seat.
  4. Remove the protect cover.
    Fig 1: Locating Protect Cover Nuts
    G05016849Courtesy of SUBARU OF AMERICA, INC.
  5. Remove the nuts which hold the ECM to the bracket.
  6. Remove the clip (A) from bracket.
    Fig 2: Locating Nuts Holding ECM To Bracket
    G05031074Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals