Front Oxygen (A/F) Sensor: Removal

Set the vehicle on a lift.
Disconnect the ground cable from the battery.
Lift up the vehicle.
Disconnect the connector of front oxygen (A/F) sensor.
- LH side
  
  Fig 1: Locating Front Oxygen (A/F) Sensor Connector (LH)
  Courtesy of SUBARU OF AMERICA, INC.
- RH side
  
  Fig 2: Locating Front Oxygen (A/F) Sensor Connector (RH)
  Courtesy of SUBARU OF AMERICA, INC.
Apply spray-type lubricant to the threaded portion of front oxygen (A/F) sensor, and leave it for one minute or more.
Remove the front oxygen (A/F) sensor.
CAUTION: When removing the front oxygen (A/F) sensor, wait until exhaust pipe cools, otherwise it will damage the exhaust pipe.
- LH side
  
  Fig 3: Locating Front Oxygen (A/F) Sensor Connector (LH)
  Courtesy of SUBARU OF AMERICA, INC.
- RH side
  
  Fig 4: Locating Front Oxygen (A/F) Sensor Connector (RH)
  Courtesy of SUBARU OF AMERICA, INC.