LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2008 >> Tribeca Base >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection System (H6DO) >> Fuel Injector >> Removal >> LH Side
April 5, 2026: LEMON Manuals is launched! Read the announcement.

LH Side

  1. Remove the collector cover.
  2. Release the fuel pressure. <Ref. to RELEASING OF FUEL PRESSURE , PROCEDURE, Fuel.>
  3. Remove the battery.
  4. Open the fuel filler flap lid, and remove the fuel filler cap.
  5. Remove the generator harness from the fuel pipe protector LH.
  6. Remove the fuel pipe protector LH.
    Fig 1: Locating Fuel Pipe Protector Bolts (LH)
    G05018408Courtesy of SUBARU OF AMERICA, INC.
  7. Disconnect the connector from fuel injector.
  8. Remove the engine harness from the fuel injector pipe LH.
  9. Remove the bolts which hold fuel injector pipe onto cylinder head.
    Fig 2: Locating Bolts Holding Fuel Injector Pipe Onto Cylinder Head (LH)
    G05667597Courtesy of SUBARU OF AMERICA, INC.
  10. Remove the fuel injector while lifting up the fuel injector pipe.
scientia non olet · About LEMON Manuals