Draining Fuel (With SUBARU Select Monitor)
WARNING:
Place "NO FIRE" signs near the working area.
CAUTION:
Be careful not to spill fuel.
NOTE:
- If the fuel pump is not driven, refer to DRAINING FUEL (THROUGH THE FUEL FILLER HOSE) , PROCEDURE, Fuel.
- Be careful not to let the battery run out.
- Release the fuel pressure. <Ref. to RELEASING OF FUEL PRESSURE , PROCEDURE, Fuel.>
- Attach ST to the fuel delivery pipe and push ST in the direction of arrow mark to disconnect the fuel delivery hose.
ST 42099AE000 QUICK CONNECTOR RELEASE
- Connect ST to the fuel delivery hose.
ST 18471AA000 FUEL PIPE ADAPTER
- Connect the gasoline proof hose to ST and put the end of the hose in the container.
- Drive the fuel pump and drain the fuel using Subaru Select Monitor. <Ref. to
FUEL PUMP CONTROL (ON/OFF OPERATION)
, OPERATION, System Operation Check Mode.>CAUTION: Be careful not to spill fuel.