Intake Manifold: Disassembly

Remove the engine harness from intake manifold. <Ref. to ENGINE HARNESS , COMPONENT, General Description.>
Remove the throttle body. <Ref. to REMOVAL , Throttle Body.>
Remove the manifold absolute pressure sensor. <Ref. to REMOVAL , Manifold Absolute Pressure Sensor.>
Remove the purge control solenoid valve. <Ref. to REMOVAL , Purge Control Solenoid Valve.>
Loosen the clamp which holds fuel injector pipe to the fuel hose, and then disconnect the pipe from fuel hose.

Fig 1: Identifying Fuel Hose
Courtesy of SUBARU OF AMERICA, INC.
Remove the bolts which install fuel pipes on in-take manifold.

Fig 2: Locating Bolts Installing Fuel Pipes On In-Take Manifold (1 Of 2)
Courtesy of SUBARU OF AMERICA, INC.

Fig 3: Locating Bolts Installing Fuel Pipes On In-Take Manifold (2 Of 2)
Courtesy of SUBARU OF AMERICA, INC.
Remove the EGR valve. <Ref. to REMOVAL , EGR Valve.>