LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2008 >> Tribeca Base >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection System (H6DO) >> Oil Flow Control Solenoid Valve >> Removal >> Exhaust Side
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Exhaust Side

  1. Disconnect the ground cable from battery.
  2. Lift up the vehicle.
  3. Remove the under cover.
  4. Disconnect the connector from exhaust oil flow control solenoid valve LH.
    Fig 1: Identifying Exhaust Oil Flow Control Solenoid Valve Connector LH
    G05667604Courtesy of SUBARU OF AMERICA, INC.
  5. Remove the exhaust oil flow control solenoid valve LH.
    Fig 2: Identifying Exhaust Oil Flow Control Solenoid Valve LH
    G05667605Courtesy of SUBARU OF AMERICA, INC.
  6. Remove the exhaust oil flow control solenoid valve RH in the same procedure as LH.
scientia non olet · About LEMON Manuals