LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2008 >> Tribeca Base >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission Control Systems >> AT Shift Lock Control System >> Electrical Specification
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Electrical Specification

Fig 1: Identifying AT Shift Lock Control System Connector Terminals
G05666100Courtesy of SUBARU OF AMERICA, INC.
ELECTRICAL SPECIFICATION

Item To connector No. Terminal No. Input/Output signal
Measured value and measuring condition
Battery power supply B281 1 9 - 16 V
2
B280 7
Ignition power supply i84 1 10 - 15 V when ignition switch is at ON or START.
ACC power supply i84 24 10 - 15V when ignition switch is at ACC.
TCM ("P" range) B280 20 Pulse signal
B280 30
Stop light switch B281 23 9 - 16 V when stop light switch is ON.
0 V when stop light switch is OFF.
"P" range switch B281 13 0 V when select lever is in "P" range.
9 - 16V when select lever is in other positions than "P" range.
Shift lock solenoid signal B280 6 8.5 - 16V when shift lock is released.
0 V when shift lock is operating.
Key warning switch signal B281 7 9 - 16 V when key is inserted.
0 V when key is removed.
Key lock solenoid signal B280 5 7.5 - 16 V when ignition switch is turned ON, with select lever in "P" range and brake switch ON.
0 V at other conditions than above.
Ground B280 22 -
i84 21
B281 8
9
scientia non olet · About LEMON Manuals