Shift Lock Operation
DIAGNOSTIC PROCEDURE FOR SYMPTOM
| Step | Check | Yes | No |
|---|---|---|---|
1 CHECK SHIFT LOCK
.
|
While brake pedal is not depressed, is it possible to move the select lever from the "P" range to other ranges? | Inspect "SELECT LEVER CANNOT BE SHIFT LOCKED". < Ref. to SELECT LEVER CANNOT BE SHIFTED , INSPECTION, AT Shift Lock Control System . > | Go to step 2 . |
| 2 CHECK SHIFT LOCK . | While brake pedal is depressed, is it possible to move the select lever from the "P" range to other ranges? | Go to step 3 . | Inspect "SELECT LEVER SHIFT LOCK CANNOT BE RELEASED". < Ref. to SELECT LEVER CANNOT BE LOCKED , INSPECTION, AT Shift Lock Control System . > |
| 3 CHECK SHIFT LOCK
. Shift the select lever to "N" range. |
While depressing the brake pedal with ignition switch OFF, is it possible to shift the select lever from "N" range to "R" range? | Go to step 4 . | Inspect "SELECT LEVER SHIFT LOCK CANNOT BE RELEASED". < Ref. to SELECT LEVER CANNOT BE LOCKED , INSPECTION, AT Shift Lock Control System . > |
| 4 CHECK KEY INTERLOCK
. Shift the select lever to "P" range. |
Can the ignition switch be turned to the "LOCK" position when the select lever is set to other than "P" range? | Go to step 5 . | Go to step 6 . |
| 5 CHECK BACKUP POWER SUPPLY
. Inspect the backup power supply circuit. < Ref. to BODY INTEGRATED UNIT POWER SUPPLY AND GROUND CIRCUIT , INSPECTION, AT Shift Lock Control System . > |
Is the backup power supply circuit operating properly? | Inspect for "KEY INTERLOCK CANNOT BE LOCKED OR RELEASED". < Ref. to KEY INTERLOCK DOES NOT LOCK OR RELEASE , INSPECTION, AT Shift Lock Control System . > | Repair the backup power supply circuit. |
| 6 CHECK KEY INTERLOCK . | Can the ignition switch be turned to the LOCK position when the select lever is set to the "P" range? | AT shift lock system is normal. | Inspect for "KEY INTERLOCK CANNOT BE LOCKED OR RELEASED". < Ref. to KEY INTERLOCK DOES NOT LOCK OR RELEASE , INSPECTION, AT Shift Lock Control System . > |