LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2009 >> Forester X, Automatic >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection System (H4SO) >> Fuel Level Sensor >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fuel Level Sensor: Removal

WARNING: Place "NO OPEN FLAMES" signs near the working area.
CAUTION:
  • Be careful not to spill fuel.
  • When the fuel meter indication is higher than two third of the total, perform the work after draining the fuel not to spill the fuel.
NOTE: The fuel level sensor is built in fuel pump assembly. Refer to REMOVAL , Fuel Pump .
  1. Remove the fuel pump assembly.
  2. Disconnect the connector from fuel pump bracket.
  3. Remove the fuel level sensor and fuel temperature sensor.
Fig 1: Identifying Fuel Temperature Sensor, Fuel Level Sensor And Connector
G05953848Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals