Engine Control Module (ECM): Installation

Install in the reverse order of removal.

CAUTION:

When the ECM on a model with immobilizer has been replaced, be sure to perform registration of the immobilizer. (Refer to the PC application help for Subaru Select Monitor).
When the ECM has been replaced, be sure to perform the registration of VIN. Refer to OPERATION

NOTE: When replacing the ECM, be careful not to use the wrong spec. ECM to avoid any damage on the fuel injection system.

Tightening torque:

7.5 N.m (0.8 kgf-m, 5.5 ft-lb)